+Graham Posted December 12, 2019 Share Posted December 12, 2019 Trying to get this working with out much success . It is producing WAV files but there is no detected hit on it just the background hiss. Total time of the WAV file is that of the pre and post settings This is my settings. I have tried both the " triggered " and " universal trigger " Link to comment Share on other sites More sharing options...
Al.Grant Posted December 12, 2019 Share Posted December 12, 2019 Not a million miles away from what I have ... Here's what I've got Link to comment Share on other sites More sharing options...
+Graham Posted December 12, 2019 Author Share Posted December 12, 2019 The only major difference I can see is the sampling rate. Yours is 12 ks/s mine is 192 ks/s going to decimate mine down to 24 and see what happens. Link to comment Share on other sites More sharing options...
Al.Grant Posted December 12, 2019 Share Posted December 12, 2019 Graham, One thing I do notice is the difference in out audio sample rates. Mine is down at 12kS/s (12000) This explains something about decimating the incoming signal: https://www.britastro.org/radio/downloads/SkyAtNight/AboutSpectrumLab_v1.pdf Not really sure it would make much of a difference though Link to comment Share on other sites More sharing options...
Al.Grant Posted December 12, 2019 Share Posted December 12, 2019 2 minutes ago, Graham said: The only major difference I can see is the sampling rate. Yours is 12 ks/s mine is 192 ks/s going to decimate mine down to 24 and see what happens. 😁 You beat me too it! Link to comment Share on other sites More sharing options...
+Graham Posted December 12, 2019 Author Share Posted December 12, 2019 Al can you left click on the trigger box and do a screen shot of the resulting settings box that appears please Link to comment Share on other sites More sharing options...
Al.Grant Posted December 12, 2019 Share Posted December 12, 2019 My bottom left (yellow) L5 trigger box Right click Left click Link to comment Share on other sites More sharing options...
+Graham Posted December 12, 2019 Author Share Posted December 12, 2019 I notice you L5 trigger box is yellow , this is in post record mode. I have pushed up my volume to 50 db to get it to turn green which is the stand by mode. Link to comment Share on other sites More sharing options...
Al.Grant Posted December 12, 2019 Share Posted December 12, 2019 My L5 is yellow when waiting for a trigger ..... once the trigger is met it turns green when recording then goes back yellow once recording stops. Link to comment Share on other sites More sharing options...
+Graham Posted December 12, 2019 Author Share Posted December 12, 2019 Thanks for that. I have backed the volume down until it turned yellow Link to comment Share on other sites More sharing options...
+Ibbo Posted December 12, 2019 Share Posted December 12, 2019 I need to reset mine 🤡 clicked on too many buttons Link to comment Share on other sites More sharing options...
+Graham Posted December 12, 2019 Author Share Posted December 12, 2019 😅 I know that feeling well 😅 Link to comment Share on other sites More sharing options...
Al.Grant Posted December 12, 2019 Share Posted December 12, 2019 3 minutes ago, Ibbo said: I need to reset mine 🤡 clicked on too many buttons Oh I've done a LOT of that in the past ..... I now take a backup everytime I start to mess around with it, it's just too easy to break -- the trouble is I've now got lots of backups 😂 Link to comment Share on other sites More sharing options...
+Ibbo Posted December 12, 2019 Share Posted December 12, 2019 1 minute ago, Al.Grant said: Oh I've done a LOT of that in the past ..... I now take a backup everytime I start to mess around with it, it's just too easy to break -- the trouble is I've now got lots of backups 😂 so have I now hich one worked?? Al.Grant 1 Link to comment Share on other sites More sharing options...
+Ibbo Posted December 12, 2019 Share Posted December 12, 2019 on a differnet subject it has stopped raining Link to comment Share on other sites More sharing options...
+Graham Posted December 12, 2019 Author Share Posted December 12, 2019 well it had to run out at some point Link to comment Share on other sites More sharing options...
+Graham Posted December 12, 2019 Author Share Posted December 12, 2019 How the hell can this not trigger it I give up Link to comment Share on other sites More sharing options...
+Ibbo Posted December 12, 2019 Share Posted December 12, 2019 right back up and running missed that one while fiddling Link to comment Share on other sites More sharing options...
Al.Grant Posted December 13, 2019 Share Posted December 13, 2019 Graham, I've just done a reboot of my detector laptop and realised something ...... After a reboot or Spec Lab restart I have to manually turn audio recording on/off ... regardless of trigger settings. The trigger levels don't change, just wether Speclab acts on it. I looked at your screenshot and and can see your top button on the left shows the .wav file name. Does this do anything when clicked? It will show any command by right clicking on the button The shows the button I have and the commands entered in it to turn audio logging on/off. I don't think it's linked specifically to my script. It might be worth entering this in one of your spare numbered buttons and see if it makes a difference. If it doesn't do anything you can just delete the text and put the number back ( i.e. "Button #10" ) Al Link to comment Share on other sites More sharing options...
+Graham Posted December 13, 2019 Author Share Posted December 13, 2019 Morning Al. Cannot see which button you mean with the .wav file name. Have set up the button Link to comment Share on other sites More sharing options...
Al.Grant Posted December 13, 2019 Share Posted December 13, 2019 54 minutes ago, Graham said: Morning Al. Cannot see which button you mean with the .wav file name. Have set up the button I was looking at your full screenshot on the first post. Just below the spectrum and above the 'capture now' button, there is one with a wav file name on it. Wasn't sure if that was an audio record on/off button or just a tile showing the current .wav file name. Link to comment Share on other sites More sharing options...
+Graham Posted December 13, 2019 Author Share Posted December 13, 2019 Thats the progress indicator button. It lists the last action that took place. Link to comment Share on other sites More sharing options...
+Graham Posted December 13, 2019 Author Share Posted December 13, 2019 I have reset it back to my original config settings and the audio can do one. I give up with it. There must be another way around this. Link to comment Share on other sites More sharing options...
+Graham Posted December 13, 2019 Author Share Posted December 13, 2019 Trying out another method. Downloaded a sound activated recorder. All I need now is some hits to test it out 😴 Link to comment Share on other sites More sharing options...
Al.Grant Posted December 13, 2019 Share Posted December 13, 2019 4 hours ago, Graham said: I have reset it back to my original config settings and the audio can do one. I give up with it. There must be another way around this. Hope you get it working Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now