Craig Posted January 4, 2012 Report Share Posted January 4, 2012 I'm 99% likely going to purchase one of these this week; http://www.altairastro.com/product.php?productid=16261&cat=260&page=1 I'd like to know how easy these are to fit and, in the eventuality I were to sell the scope, how easy they are to remove? Quote Link to comment Share on other sites More sharing options...
+Doc Posted January 4, 2012 Report Share Posted January 4, 2012 They come with double sided sticky tape, which is very sticky and works really well. You can also drill and screw your telrad base on. Whichever way you do it make sure you position it correctly first. When I had one I used the sticky tape. Quote Link to comment Share on other sites More sharing options...
+Rusty Strings Posted January 4, 2012 Report Share Posted January 4, 2012 I use the tape to allow trial and error to find the best place for it Quote Link to comment Share on other sites More sharing options...
Guest Kheldar Posted January 4, 2012 Report Share Posted January 4, 2012 I used a single screw from the finder base and put it right there. The other end I tape down. Quote Link to comment Share on other sites More sharing options...
BAZ Posted January 4, 2012 Report Share Posted January 4, 2012 Tape it down and if it's not where you want it, I have some spare industrial flavour double sided tape you can have. Quote Link to comment Share on other sites More sharing options...
Guest sapperslappy Posted January 4, 2012 Report Share Posted January 4, 2012 Taping it down, as tacky as it sounds, really sounds like your easiest and best bet. Quote Link to comment Share on other sites More sharing options...
Daz Type-R Posted January 4, 2012 Report Share Posted January 4, 2012 Are you and me buying the same stuff? Lol, I have just got a Telrad as well and currently I have used pull ties to temp fasten mine down, then I was going to use the sticky tape. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.