Guest Ely Ellis Posted April 25, 2013 Share Posted April 25, 2013 Hi all, I managed to get out and have a go at a few more doubles. Having decided that Bootes was in the best position I made my list and went through them taking images as I went. Some turned out ok, others were very poor, maybe conditions were not as good as I thought. This time out of my list, the best resolution I managed was about 6.9" arc, this was STF 1888 or Xi Boo, I could only just make out the separation. Got a couple of very wide ones too, Delta Boo and Mu Boo both at just over 100" arc and very bright too. Unfortunately there were no show case doubles among them, all quite plain, but that didn't bother me as I enjoy capturing these doubles and adding them to my own catalogue. The images are on my website at http://cathprotech.coffeecup.com/doubles_bootes.html Attached on here should be images of the ones listed above, if I have done it right. Thanks for your interest. Martin Link to comment Share on other sites More sharing options...
Guest Eddy Posted April 25, 2013 Share Posted April 25, 2013 Lucky to get out, weather has been a bit poor recently, lucky with your doubles you don't need long exposures Link to comment Share on other sites More sharing options...
oldfruit Posted April 28, 2013 Share Posted April 28, 2013 Some nice doubles there Martin. Link to comment Share on other sites More sharing options...
+Graham Posted April 28, 2013 Share Posted April 28, 2013 nice one Martin. I have a fascination with doubles. Link to comment Share on other sites More sharing options...
+RonC Posted April 28, 2013 Share Posted April 28, 2013 Well imaged doubles, nice one Martin! Link to comment Share on other sites More sharing options...
Guest Ely Ellis Posted April 29, 2013 Share Posted April 29, 2013 Thanks all. Link to comment Share on other sites More sharing options...
Mark Harper. Posted January 14, 2014 Share Posted January 14, 2014 Very nice. Link to comment Share on other sites More sharing options...
Guest foundaplanet Posted January 19, 2014 Share Posted January 19, 2014 Good work Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now