Guest zidder Posted January 9, 2015 Share Posted January 9, 2015 Sorry if this is a repeat Other than Astromods does anywhere else do the self adhesive circles Link to comment Share on other sites More sharing options...
tuckstar Posted January 9, 2015 Share Posted January 9, 2015 (edited) I was looking at taking a design to one of those vinyl places they should be able to print one for you. I have a design for one on file. If you would like it, pm me your email address and I'll send it to you. Edited January 9, 2015 by tuckstar Link to comment Share on other sites More sharing options...
+RonC Posted January 9, 2015 Share Posted January 9, 2015 Have a word with Mike (Perli8r) he sorted me out and others on the forum! Cheers Ron Link to comment Share on other sites More sharing options...
Guest zidder Posted January 25, 2015 Share Posted January 25, 2015 Still struggling getting a circle, contacted a couple of sign printer but very expensive. £20.00 for one plus £15.00 setting up charge, If I had ten would cost £10,00 each, Don't think I want 10 10" dobs Link to comment Share on other sites More sharing options...
+RonC Posted January 25, 2015 Share Posted January 25, 2015 Send a PM to Mike, Perkil8r he will sort it for you, he did mine and others on the forum! Ron Link to comment Share on other sites More sharing options...
Brantuk Posted January 25, 2015 Share Posted January 25, 2015 Folks used to get these done at Staples for about £15 if you take it to them on a disk and specify the size Link to comment Share on other sites More sharing options...
Guest zidder Posted January 25, 2015 Share Posted January 25, 2015 Send a PM to Mike, Perkil8r he will sort it for you, he did mine and others on the forum! Ron I have spoke to Mike he doesn't do them at the moment Link to comment Share on other sites More sharing options...
Guest zidder Posted April 28, 2015 Share Posted April 28, 2015 Setting circle coming on, decided to print my own Link to comment Share on other sites More sharing options...
Doc Posted April 29, 2015 Share Posted April 29, 2015 Looking good Gary where did you get it done? Link to comment Share on other sites More sharing options...
Guest zidder Posted April 29, 2015 Share Posted April 29, 2015 I did it on my own printer in strips ink may not be water fast so am going to Lacquer it after Link to comment Share on other sites More sharing options...
Guest zidder Posted April 29, 2015 Share Posted April 29, 2015 Next stage done, slight issue when I fitted the cable tidy it was a tight fit I gave it a tap and the melamine split, don't think it will be a major problem Link to comment Share on other sites More sharing options...
Guest zidder Posted May 1, 2015 Share Posted May 1, 2015 My circle backing plate. Many thanks to Daz for his guide, made life a lot more simpler Link to comment Share on other sites More sharing options...
Doc Posted May 1, 2015 Share Posted May 1, 2015 Very similar to my one Gary. There's quite a few of us now who have this design, it works really well. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now